ID: 14906
LV-671 Mini-ITX Moederbord Ideaal voor inbouw
€15,00
Geen aanbiedingen geplaatst
Omschrijving
LV-671 Mini-ITX Moederbord (specificatie hieronder / zelf ff Googlen)
Doe een bod voor moederbord, zoals op foto 1, zonder cpu, zonder ram etc.
Tegen meerprijs leverbaar met:
Intel Celeron M Mobile,
Koelblok,
Koelfan,
I/O shield
Ram (512MB DDR 333mhz)
DOM module (1GB)
etc. (zie foto's aub)
Specification
Form Factor: Mini-ITX form factor at 170 x 170 mm
CPU: Micro-FCPGA Mobile Intel Pentium M / Celeron M ( Intel Celeron M 4xx series can't support )
Memory: One 184-pin DIMM socket Support up to 1 GBytes DDR 266/333 SDRAM
Chipset: 82855GME GMECH and 82801DB ICH4
Watchdog Timer: Programmable generates NMI or system reset watchdog timer
with 1 to 255 sec. / min. of time out value
Power Management: ACPI 1.0 compliant, supports power saving mode with ATX PSU
Real Time Clock: Intel ICH4 built-in RTC with onboard lithium battery
PCI Enhanced IDE: Dual UltraATA/100 bus master IDE channels
Support up to 4 ATAPI devices on 40-/44-pin IDE ports
Jumper selectable Vcc power output on 40-pin IDE1 for power cable free DiskOnModule flash disk
VGA Interface: Intel 855GME GMECH built-in Intel Extreme Graphics 2 with 266 MHz VGA core and 256-bit 3D engine Intel Dynamic Video Memory up to 64 MB shared with system
External DB15 female connector on rear I/O panel
LVDS Interface: Intel 855GME GMECH built-in Intel Extreme Graphics 2
with onboard Chrontel CH7017A built-in LVDS transmitter Resolution up to 1600 x 1200 @ 16M colors Support 24-bit Dual channel LVDS TFT LCD Onboard 20-pin Hirose DF13-20DP-1.25V connector
TV-out Interface: (Optional)
Intel 855GME GMECH built-in Intel Extreme Graphics 2 with MA-SDTV Mini-AGP add on card
LAN Interface: Intel 82541PI Giga Mbps Ethernet interface
Audio Interface: Intel ICH4 with onboard ACL650 AC97 3D audio codec
5.1 channel, line-in, line-out, Mic-in, CD-in and S/P DIF interface
PCMCIA Interface: PCI RICOH R5C475II PCMCIA PC card / CardBus controller
Comply with PCMCIA V.2.10 and JEIDA 4.2 Specification
16-/32-bit data bus, support hot swap function
Mix and Match 5V/3.3V PC Card, 16/32 Card, 3.3 CardBus Card
One PCMCIA type-I/II slot
Hi-Speed USB 2.0: Intel ICH4 chipset built-in Hi-Speed USB 2.0 interface
with 480 Mbps of data transfer rate and bootable setting in BIOS
Multi-I/O Port: 2 x COM port, 1 x parallel, 6 x USB 2.0, 1 x IrDA, 1 x FDD,
1 x PS/2 keyboard and mouse port.
External I/O Port:
Back panel : PS/2 keyboard and mouse port, VGA, parallel port,
Dual COM port, Speaker-out, SPDIF, LAN, Dual USB2.0,
DC power input.
Front panel : MIC, Line in & earphone or Central/Base,
Rear & Front audio outputs and 2 x Dual USB port
Solid State Disk: CompactFlash Card
CompactFlash socket supports CompactFlash Card (CFC)
Support PIO mode 4 up to 16.6M Bytes of data transfer rate
Default setting as secondary IDE port at master mode
Bootable, driver free IDE-based flash disk
Flash memory capacity up to 1G Bytes (and beyond)
DiskOnModule Flash Disk
IDE-based, bootable, driver free DiskOnModule flash disk
PIO mode 4 with 16.6 Mbps of data transfer rate
Flash memory capacity up to 1GBytes (and beyond)
Expansive Slot: One 32-bit PCI slot supports 2 bus master PCI via riser card,
and Mini-PCI or Mini-AGP port can be used optionally.
Environment: Power Requirement: Single 19V 6A DC input or 12V 10A DC input Board
Dimension (W x L): 170mm x 170mm with standard Mini-ITX form factor
Operation Temperature: 0 ~ 60oC (32 ~ 140oF)
Doe een bod voor moederbord, zoals op foto 1, zonder cpu, zonder ram etc.
Tegen meerprijs leverbaar met:
Intel Celeron M Mobile,
Koelblok,
Koelfan,
I/O shield
Ram (512MB DDR 333mhz)
DOM module (1GB)
etc. (zie foto's aub)
Specification
Form Factor: Mini-ITX form factor at 170 x 170 mm
CPU: Micro-FCPGA Mobile Intel Pentium M / Celeron M ( Intel Celeron M 4xx series can't support )
Memory: One 184-pin DIMM socket Support up to 1 GBytes DDR 266/333 SDRAM
Chipset: 82855GME GMECH and 82801DB ICH4
Watchdog Timer: Programmable generates NMI or system reset watchdog timer
with 1 to 255 sec. / min. of time out value
Power Management: ACPI 1.0 compliant, supports power saving mode with ATX PSU
Real Time Clock: Intel ICH4 built-in RTC with onboard lithium battery
PCI Enhanced IDE: Dual UltraATA/100 bus master IDE channels
Support up to 4 ATAPI devices on 40-/44-pin IDE ports
Jumper selectable Vcc power output on 40-pin IDE1 for power cable free DiskOnModule flash disk
VGA Interface: Intel 855GME GMECH built-in Intel Extreme Graphics 2 with 266 MHz VGA core and 256-bit 3D engine Intel Dynamic Video Memory up to 64 MB shared with system
External DB15 female connector on rear I/O panel
LVDS Interface: Intel 855GME GMECH built-in Intel Extreme Graphics 2
with onboard Chrontel CH7017A built-in LVDS transmitter Resolution up to 1600 x 1200 @ 16M colors Support 24-bit Dual channel LVDS TFT LCD Onboard 20-pin Hirose DF13-20DP-1.25V connector
TV-out Interface: (Optional)
Intel 855GME GMECH built-in Intel Extreme Graphics 2 with MA-SDTV Mini-AGP add on card
LAN Interface: Intel 82541PI Giga Mbps Ethernet interface
Audio Interface: Intel ICH4 with onboard ACL650 AC97 3D audio codec
5.1 channel, line-in, line-out, Mic-in, CD-in and S/P DIF interface
PCMCIA Interface: PCI RICOH R5C475II PCMCIA PC card / CardBus controller
Comply with PCMCIA V.2.10 and JEIDA 4.2 Specification
16-/32-bit data bus, support hot swap function
Mix and Match 5V/3.3V PC Card, 16/32 Card, 3.3 CardBus Card
One PCMCIA type-I/II slot
Hi-Speed USB 2.0: Intel ICH4 chipset built-in Hi-Speed USB 2.0 interface
with 480 Mbps of data transfer rate and bootable setting in BIOS
Multi-I/O Port: 2 x COM port, 1 x parallel, 6 x USB 2.0, 1 x IrDA, 1 x FDD,
1 x PS/2 keyboard and mouse port.
External I/O Port:
Back panel : PS/2 keyboard and mouse port, VGA, parallel port,
Dual COM port, Speaker-out, SPDIF, LAN, Dual USB2.0,
DC power input.
Front panel : MIC, Line in & earphone or Central/Base,
Rear & Front audio outputs and 2 x Dual USB port
Solid State Disk: CompactFlash Card
CompactFlash socket supports CompactFlash Card (CFC)
Support PIO mode 4 up to 16.6M Bytes of data transfer rate
Default setting as secondary IDE port at master mode
Bootable, driver free IDE-based flash disk
Flash memory capacity up to 1G Bytes (and beyond)
DiskOnModule Flash Disk
IDE-based, bootable, driver free DiskOnModule flash disk
PIO mode 4 with 16.6 Mbps of data transfer rate
Flash memory capacity up to 1GBytes (and beyond)
Expansive Slot: One 32-bit PCI slot supports 2 bus master PCI via riser card,
and Mini-PCI or Mini-AGP port can be used optionally.
Environment: Power Requirement: Single 19V 6A DC input or 12V 10A DC input Board
Dimension (W x L): 170mm x 170mm with standard Mini-ITX form factor
Operation Temperature: 0 ~ 60oC (32 ~ 140oF)